|
||||
Window Installation and ReplacementFree Estimates - No Obligation - Fast and Simple If you are an accomplished handyman you can probably install your new energy-efficient windows. If you are all thumbs and your family won't let you using a mechanical pencil, then a call to your professional window replacement contractor is the right call. If you decide to replace your windows yourself there are few things you'll need to know and some tools you will need. There are two kinds of new windows: • New construction, and • Replacement You'll want to be sure and tell the window dealer that you want replacement windows. These are designed to be secured into place form inside the house. Where as, new construction windows are set in place and fastened from outside before the siding and trim are put onto the home. Measure you opening side-to-side from the jams and from top-to-bottom. It's a good idea to measure in a few different places on the window to make sure the measurement are the same. Rip out the old window trim and sill. Set the new window in the open and check it for level and plumb. You will probably need to use shims to get it square. To check for square, measure the window from corner-to-corner from both upper corners. If the window is square the diagonal measurements will be identical. Fasten the new window into place and replace the trim. Window Contractors If you don't get the new windows properly installed you may not gain any benefit over the old windows if air continues to leak out around them. Replacing a window is a two-person job. Someone will need to stand outside and assist in holding the window while it is fastened from the inside. If you have second or third-story windows this can be dangerous, so be careful. The smart alternative is to hire a replacement window contractor to handle the job for you. They are the experts with the right training, experience and equipment. Also, having the windows professionally installed helps to guard your window warranty and the contractor will also have an installation warranty for their workmanship. by Hal Major |
||||
|
Use of this site constitutes acceptance of our
user agreement and privacy policy. © Copyright 2007, Contractor.org. All rights reserved. Contact Contractors.org at 1-800-316-8147 |
||||